YNM-BoomBarriersg
Click on image to Zoom
  • Automatic Boom Barrier Suppliers in Hyderabad

Automatic Boom Barrier Suppliers in Hyderabad

Product Specification and Solution
Shipping Charges : To Pay Basis
Dispatched in:24 Hours to any part of India
GST : 18.00%

We being a Leading Manufacturers, Suppliers, Exporter of Automatic Boom Barriers / Boom Barrier in Hyderabad ( India ).We are Manufacturer, Wholesaler, Supplier and Service Provider of Automatic Boom Barriers along with installation Service from India.Boom Barriers , Automatic Boom Barriers ,Boom Gates, Gate Barrier  is a bar, or pole pivoted to allow the boom to block vehicular access through a controlled point. Typically the tip of a boom gate rises in a vertical arc to a near vertical position. Boom gates are often counterweighted, so the pole is easily tipped. Boom gates are often paired either end to end, or offset appropriately to block traffic in both directions, Boom Barriers are very useful in traffic management, parking and security. They can be easily integrated into toll collection systems, automatic parking systems & card access systems. These Boom Barriers are available with varied boom lengths to cater to varied client requirements.

Automatic Boom Barriers also called as Automatic Speed Barrier, Parking Barrier, Parking Auto Boom Toll Barrier, Electromechanical Boom Barrier, Automatic Industrial Vehicle Barrier, Automatic Barrier, Barrier Gates and Boom Barrier.The parking barrier system for frequently used entrances The Parking Barriers secure the entrance to underground garages, parking areas or factory entrances.
We offer an extensive range of Boom Barriers, Automatic Boom Barriers used for securing entry and exit points. These Boom Barriers are widely used in factories, office complexes, condominiums, toll tax plazas etc. Our sophisticated Auto Boom Barriers are available with an inbuilt anti crush safety device specially meant for suspending the motion of the barrier.

Boom Barrier which is a bar or pole that allow the boom to block vehicular access through a point. Usually the top of a bottom gate rises in a vertical arc to a nearest vertical position. These are used at crossings, parking, entrance, checkpoints and other restricted areas.

1.INTRODUCTION TO AUTOMATIC BOOM BARRIER: The Complete Boom Barriers drive system is installed on a metal base frame and can be easily detached by removing bolts. The Special lever system ensures that the boom is locked in both end positions.

•The simplest process in this barrier is radio remote transmitters. You can operate barrier from Vehicles. It is much secured.

•The Barrier should be mounted on a concrete foundation of plan area & The Distance should be maintained between the boom tips.

•Multifunctional control unit with shock resistant plug-in terminals is attached in each barrier system.

•We can also execute the complete project by providing the Security & Safety Solution for Automatic Boom Barriers etc...

Boom Barrier which is a bar or pole that allow the boom to block vehicular access through a point. Usually the top of a bottom gate rises in a vertical arc to a nearest vertical position. These are used at crossings, parking, entrance, checkpoints and other restricted areas.

                     A boom barrier, also known as a boom gate, it is a bar, or pole pivoted to allow the boom to block vehicular access through a controlled point. Automatic Boom Barrier series are ideal for smooth operations with intensive use. It’s reliable mechanism and compact control unit designs to meet wide range of industrial, commercial and residential application.

                   There are various technologies for an automatic boom barrier. One of them is electro-mechanical, which is widely used due to its reliability. The other technologies are often manufacturer specific. This electro-mechanical device comes with 24VDC drive unit which can run continuously without generating heat, so electro-mechanical boom barriers can be operated continuously and in an intensive duty cycle.

2.DESCRIPTION / SPECIFICATIONS OF AUTOMATIC BOOM BARRIER:

•Solution: Boom Barriers system for frequently used at entrances and very useful in traffic management, parking and security for securing the entry and exit points.

•Type: Automatic, Semi-Automatic and Manual.

•Length: Boom Barriers 3500 mm To 6000 mm 

•Telescopic Boom Close Size 3000 mm in Length & Open Length 6000 mm.

•Boom Can Be Adjustable At Any Length In Between 3.5 Meter To 6 Meter.

•Passage height: max. 2 m

•Nominal voltage: 230 V

•Double Spring Balance for Heavy Duty Use.

•Opening & Closing Time 6 Sec.

3.FEATURES OF AUTOMATIC BOOM BARRIER:

•High torque motor: Long lasting motor that generates up to 600Nm torque.

•Smooth operation: No bounce/jerk of boom at end positions.

•Better visibility: White aluminium boom bar with reflective strips and RAL 2005 powder coated housing.

•Several versions of automatic barrier are available such as hydraulic & electromechanical.

•Dual speed of the barrier ensures quick opening and closing of the barrier with soft landing.

•Highly durable

•High performance

•Cost-effective

•Seamless finish

•Oil immerged gear reducer   

•Self-locking in closed position

•Quiet and stable operation

•Powerful torsion spring

•Manual release handle in case of Power failure

•Wiring terminals for remote control button switch, alarm lamp, infrared photocell and loop detector

•Available to connecting with parking system and toll gate system.

4.APPLICATIONS OF AUTOMATIC BOOM BARRIER:

•Automatic Boom Barriers used for securing entry and exit points.

•Tolls Plaza’s

•Parking areas

•Industries

•Private & govt. Assets

•Residential areas

•Airports 

•Factories

•Office Complexes 

•Corporate Houses

•Note: 1) Any Civil, Carpentry Or Electrical Work Will Be in The Client Scope.

2) Scaffolding To Be Provided By The Client While Installation.

5.WHAT IS THE ROLE OF AUTOMATIC BOOM BARRIER:

5.1.What is Automatic Boom Barrier?  Boom Barrier which is a bar or pole that allow the boom to block vehicular access through a point. Usually the top of a bottom gate rises in a vertical arc to a nearest vertical position. These are used at crossings, parking, entrance, checkpoints and other restricted areas.

5.2.Description of Automatic Boom Barrier? The Description of Automatic Boom Barriers is given in three Ways. One is for Base and the other is for Pole / bar which is connected to Boom and the Last is the Pole at the Other Side. Coming to Base Boom it is in the Shape of Rectangle where it is fixed to ground by using Nuts & Bolts. The Inner section of Boom consists of Internal Mechanism where to operate the Barrier / Pole. It is also connected to Electricity for Automatic Purpose. The Outer Section is completely covered with ABS Plastic to Make the Boom to look Good.

                  Now Coming to Pole / Bar, this pole / bar need to be connected to Boom in a Horizontal way. So that by internal Mechanism in Boom it can move to Up & Down while the Vehicles are moving. The Bar is connected to boom at one side of boom with Nuts & Bolts in the direction of connected to internal mechanism. This Connection is also covered with Plastic Sheet. The Wire Connection will be given through two PVC Pipes to the Bar. So that it can Move automatically.

                    Let’s Move to the Last Pole which is installed on ground by digging the Ground on exactly other side of Boom. Because the Bar which is connected to boom gets rested on that pole. The Resting Pole must be in the Shape of Y. So that the Bar gets Rest in the Middle of Y. So that for Simple Things it does not gets moved to other Directions and does not get hurt to any persons.

5.3.Why We Use Automatic Boom Barrier? Places where there are possibilities of heavy traffic there you can use this product.  This fully automated product is one of the marvels from our stable which can automatically direct the incoming and outgoing vehicles. As this product is made from the top quality material so one can use it for a longer period of time and due to its water resistant quality is ideal for using in any weather condition. 

5.4.Where are they used? These Automatic Boom Barriers are used near Residential Areas, where as Apartments, Corporate Areas such as Factories, Offices etc. These Boom Barriers are used for Security Persons and does not allow moving the Other Persons to Restricted Areas. Only The Persons belongs to that area / Factory By showing their Identity they can enter in to the area by crossing this Boom Barrier.

                     This really helps to avoid unknown Persons to allow in to our area and helps to identify that how many people are in Particular area. This Increases the Security for Particular area.

5.5.How are they Fixed?     

•The installation ground shall be the reinforced concrete, and the thickness shall be more than 100mm.

•Please drill the installation holes for the expansion bolts M10 or pre launch the installation bolts M10, and leave enough length more than 30mm.

•Please pre-launch one 25mm PVC pipe underground, and let it protrude the ground more than 50mm.

•Let the power supply wires and the access control device cables through the PVC tube to the turnstile power supply terminal and access control device.

•Two PVC pipes will be required if the cables for the access control device is not the shielded wire.

•Arm Assembly :

•Insert the arm head into the slot of the moving disk, and let the fixing hole in the arm meet the fixing hole in the moving disk. Please find the mark in the arm and moving disk slot, and let them be the same one.

•Insert the peg into the fixing hole, and let it be in the right position.

•Fix the peg with the screw’s

•Wiring Connection

•Input Signal Requirements : 

•12V voltage signal, relay type.

•More than 100ms DC 12 V pulse signal, more than 10mA.

•Wire/Cable Connection :

•Connect the AC 220V power supply wire to the designated terminal.

•Connect the output signal cable of the access control device to the designated terminals, as the wiring diagram show.

•In the turnstile, there is one press button controller is connected. You can connect output cable of your own access control device to replace the press button controller, or connect them together.

•Function :

The left unlock signal is given to unlock the turnstile arm in the left direction. The LED indicator turns green to show the left direction free. Push the arm of turnstile to a definite degree, the arm moves to the next position. If no one pushes the arm of turnstile within the definite time, the turnstile will be locked automatically.

The right unlock signal is given to unlock the turnstile arm in the right direction. The LED indicator turns green to show the right direction free. Push the arm of turnstile to a definite degree, the arm moves to the next position. If no one pushes the arm of turnstile within the definite time, the turnstile will be locked automatically.

•Arm Drop Down

•When the power supply is failed, the turnstile arm will drop down automatically to free the passageway. When the power supply is on, press the arm and then put up the arm to the horizontal position, the turnstile arm will be locked again in the block status.

•Single Direction Setup

•If you want to let one direction be free, please adjust the related screw after you open the turnstile housing top cover and inside cover. Let the position arm be in the unlock position by hand, and let the adjust screw lock the position arm.

6.Life Span & Warranty of Automatic Boom Barrier:

•One Year Warranty against any Manufacturing Defect but not Usage Defect / Natural Calamity.

•Our Product can sustain up to 1 year without any Usage Defect.

7.CONCLUSION: These are the Complete Specifications, Features of Automatic Boom Barriers. This helps for Security Purpose in Corporate areas & Residential areas. Ynm automatic Boom Barriers  gives you Long life and they are Highly Durable in any Whether Conditions.

Automatic Boom Barrier Suppliers in Hyderabad

Product Specification and Solution

We being a Leading Manufacturers, Suppliers, Exporter of Automatic Boom Barriers / Boom Barrier in Hyderabad ( India ).We are Manufacturer, Wholesaler, Supplier and Service Provider of Automatic Boom Barriers along with installation Service from India.Boom Barriers , Automatic Boom Barriers ,Boom Gates, Gate Barrier  is a bar, or pole pivoted to allow the boom to block vehicular access through a controlled point. Typically the tip of a boom gate rises in a vertical arc to a near vertical position. Boom gates are often counterweighted, so the pole is easily tipped. Boom gates are often paired either end to end, or offset appropriately to block traffic in both directions, Boom Barriers are very useful in traffic management, parking and security. They can be easily integrated into toll collection systems, automatic parking systems & card access systems. These Boom Barriers are available with varied boom lengths to cater to varied client requirements.

Automatic Boom Barriers also called as Automatic Speed Barrier, Parking Barrier, Parking Auto Boom Toll Barrier, Electromechanical Boom Barrier, Automatic Industrial Vehicle Barrier, Automatic Barrier, Barrier Gates and Boom Barrier.The parking barrier system for frequently used entrances The Parking Barriers secure the entrance to underground garages, parking areas or factory entrances.
We offer an extensive range of Boom Barriers, Automatic Boom Barriers used for securing entry and exit points. These Boom Barriers are widely used in factories, office complexes, condominiums, toll tax plazas etc. Our sophisticated Auto Boom Barriers are available with an inbuilt anti crush safety device specially meant for suspending the motion of the barrier.

Boom Barrier which is a bar or pole that allow the boom to block vehicular access through a point. Usually the top of a bottom gate rises in a vertical arc to a nearest vertical position. These are used at crossings, parking, entrance, checkpoints and other restricted areas.

1.INTRODUCTION TO AUTOMATIC BOOM BARRIER: The Complete Boom Barriers drive system is installed on a metal base frame and can be easily detached by removing bolts. The Special lever system ensures that the boom is locked in both end positions.

•The simplest process in this barrier is radio remote transmitters. You can operate barrier from Vehicles. It is much secured.

•The Barrier should be mounted on a concrete foundation of plan area & The Distance should be maintained between the boom tips.

•Multifunctional control unit with shock resistant plug-in terminals is attached in each barrier system.

•We can also execute the complete project by providing the Security & Safety Solution for Automatic Boom Barriers etc...

Boom Barrier which is a bar or pole that allow the boom to block vehicular access through a point. Usually the top of a bottom gate rises in a vertical arc to a nearest vertical position. These are used at crossings, parking, entrance, checkpoints and other restricted areas.

                     A boom barrier, also known as a boom gate, it is a bar, or pole pivoted to allow the boom to block vehicular access through a controlled point. Automatic Boom Barrier series are ideal for smooth operations with intensive use. It’s reliable mechanism and compact control unit designs to meet wide range of industrial, commercial and residential application.

                   There are various technologies for an automatic boom barrier. One of them is electro-mechanical, which is widely used due to its reliability. The other technologies are often manufacturer specific. This electro-mechanical device comes with 24VDC drive unit which can run continuously without generating heat, so electro-mechanical boom barriers can be operated continuously and in an intensive duty cycle.

2.DESCRIPTION / SPECIFICATIONS OF AUTOMATIC BOOM BARRIER:

•Solution: Boom Barriers system for frequently used at entrances and very useful in traffic management, parking and security for securing the entry and exit points.

•Type: Automatic, Semi-Automatic and Manual.

•Length: Boom Barriers 3500 mm To 6000 mm 

•Telescopic Boom Close Size 3000 mm in Length & Open Length 6000 mm.

•Boom Can Be Adjustable At Any Length In Between 3.5 Meter To 6 Meter.

•Passage height: max. 2 m

•Nominal voltage: 230 V

•Double Spring Balance for Heavy Duty Use.

•Opening & Closing Time 6 Sec.

3.FEATURES OF AUTOMATIC BOOM BARRIER:

•High torque motor: Long lasting motor that generates up to 600Nm torque.

•Smooth operation: No bounce/jerk of boom at end positions.

•Better visibility: White aluminium boom bar with reflective strips and RAL 2005 powder coated housing.

•Several versions of automatic barrier are available such as hydraulic & electromechanical.

•Dual speed of the barrier ensures quick opening and closing of the barrier with soft landing.

•Highly durable

•High performance

•Cost-effective

•Seamless finish

•Oil immerged gear reducer   

•Self-locking in closed position

•Quiet and stable operation

•Powerful torsion spring

•Manual release handle in case of Power failure

•Wiring terminals for remote control button switch, alarm lamp, infrared photocell and loop detector

•Available to connecting with parking system and toll gate system.

4.APPLICATIONS OF AUTOMATIC BOOM BARRIER:

•Automatic Boom Barriers used for securing entry and exit points.

•Tolls Plaza’s

•Parking areas

•Industries

•Private & govt. Assets

•Residential areas

•Airports 

•Factories

•Office Complexes 

•Corporate Houses

•Note: 1) Any Civil, Carpentry Or Electrical Work Will Be in The Client Scope.

2) Scaffolding To Be Provided By The Client While Installation.

5.WHAT IS THE ROLE OF AUTOMATIC BOOM BARRIER:

5.1.What is Automatic Boom Barrier?  Boom Barrier which is a bar or pole that allow the boom to block vehicular access through a point. Usually the top of a bottom gate rises in a vertical arc to a nearest vertical position. These are used at crossings, parking, entrance, checkpoints and other restricted areas.

5.2.Description of Automatic Boom Barrier? The Description of Automatic Boom Barriers is given in three Ways. One is for Base and the other is for Pole / bar which is connected to Boom and the Last is the Pole at the Other Side. Coming to Base Boom it is in the Shape of Rectangle where it is fixed to ground by using Nuts & Bolts. The Inner section of Boom consists of Internal Mechanism where to operate the Barrier / Pole. It is also connected to Electricity for Automatic Purpose. The Outer Section is completely covered with ABS Plastic to Make the Boom to look Good.

                  Now Coming to Pole / Bar, this pole / bar need to be connected to Boom in a Horizontal way. So that by internal Mechanism in Boom it can move to Up & Down while the Vehicles are moving. The Bar is connected to boom at one side of boom with Nuts & Bolts in the direction of connected to internal mechanism. This Connection is also covered with Plastic Sheet. The Wire Connection will be given through two PVC Pipes to the Bar. So that it can Move automatically.

                    Let’s Move to the Last Pole which is installed on ground by digging the Ground on exactly other side of Boom. Because the Bar which is connected to boom gets rested on that pole. The Resting Pole must be in the Shape of Y. So that the Bar gets Rest in the Middle of Y. So that for Simple Things it does not gets moved to other Directions and does not get hurt to any persons.

5.3.Why We Use Automatic Boom Barrier? Places where there are possibilities of heavy traffic there you can use this product.  This fully automated product is one of the marvels from our stable which can automatically direct the incoming and outgoing vehicles. As this product is made from the top quality material so one can use it for a longer period of time and due to its water resistant quality is ideal for using in any weather condition. 

5.4.Where are they used? These Automatic Boom Barriers are used near Residential Areas, where as Apartments, Corporate Areas such as Factories, Offices etc. These Boom Barriers are used for Security Persons and does not allow moving the Other Persons to Restricted Areas. Only The Persons belongs to that area / Factory By showing their Identity they can enter in to the area by crossing this Boom Barrier.

                     This really helps to avoid unknown Persons to allow in to our area and helps to identify that how many people are in Particular area. This Increases the Security for Particular area.

5.5.How are they Fixed?     

•The installation ground shall be the reinforced concrete, and the thickness shall be more than 100mm.

•Please drill the installation holes for the expansion bolts M10 or pre launch the installation bolts M10, and leave enough length more than 30mm.

•Please pre-launch one 25mm PVC pipe underground, and let it protrude the ground more than 50mm.

•Let the power supply wires and the access control device cables through the PVC tube to the turnstile power supply terminal and access control device.

•Two PVC pipes will be required if the cables for the access control device is not the shielded wire.

•Arm Assembly :

•Insert the arm head into the slot of the moving disk, and let the fixing hole in the arm meet the fixing hole in the moving disk. Please find the mark in the arm and moving disk slot, and let them be the same one.

•Insert the peg into the fixing hole, and let it be in the right position.

•Fix the peg with the screw’s

•Wiring Connection

•Input Signal Requirements : 

•12V voltage signal, relay type.

•More than 100ms DC 12 V pulse signal, more than 10mA.

•Wire/Cable Connection :

•Connect the AC 220V power supply wire to the designated terminal.

•Connect the output signal cable of the access control device to the designated terminals, as the wiring diagram show.

•In the turnstile, there is one press button controller is connected. You can connect output cable of your own access control device to replace the press button controller, or connect them together.

•Function :

The left unlock signal is given to unlock the turnstile arm in the left direction. The LED indicator turns green to show the left direction free. Push the arm of turnstile to a definite degree, the arm moves to the next position. If no one pushes the arm of turnstile within the definite time, the turnstile will be locked automatically.

The right unlock signal is given to unlock the turnstile arm in the right direction. The LED indicator turns green to show the right direction free. Push the arm of turnstile to a definite degree, the arm moves to the next position. If no one pushes the arm of turnstile within the definite time, the turnstile will be locked automatically.

•Arm Drop Down

•When the power supply is failed, the turnstile arm will drop down automatically to free the passageway. When the power supply is on, press the arm and then put up the arm to the horizontal position, the turnstile arm will be locked again in the block status.

•Single Direction Setup

•If you want to let one direction be free, please adjust the related screw after you open the turnstile housing top cover and inside cover. Let the position arm be in the unlock position by hand, and let the adjust screw lock the position arm.

6.Life Span & Warranty of Automatic Boom Barrier:

•One Year Warranty against any Manufacturing Defect but not Usage Defect / Natural Calamity.

•Our Product can sustain up to 1 year without any Usage Defect.

7.CONCLUSION: These are the Complete Specifications, Features of Automatic Boom Barriers. This helps for Security Purpose in Corporate areas & Residential areas. Ynm automatic Boom Barriers  gives you Long life and they are Highly Durable in any Whether Conditions.

Automatic Boom Barrier Suppliers in Hyderabad

We being a Leading Manufacturers, Suppliers, Exporter of Automatic Boom Barriers / Boom Barrier in Hyderabad ( India ).We are Manufacturer, Wholesaler, Supplier and Service Provider of Automatic Boom Barriers along with installation Service from India.Boom Barriers , Automatic Boom Barriers ,Boom Gates, Gate Barrier  is a bar, or pole pivoted to allow the boom to block vehicular access through a controlled point. Typically the tip of a boom gate rises in a vertical arc to a near vertical position. Boom gates are often counterweighted, so the pole is easily tipped. Boom gates are often paired either end to end, or offset appropriately to block traffic in both directions, Boom Barriers are very useful in traffic management, parking and security. They can be easily integrated into toll collection systems, automatic parking systems & card access systems. These Boom Barriers are available with varied boom lengths to cater to varied client requirements.

Automatic Boom Barriers also called as Automatic Speed Barrier, Parking Barrier, Parking Auto Boom Toll Barrier, Electromechanical Boom Barrier, Automatic Industrial Vehicle Barrier, Automatic Barrier, Barrier Gates and Boom Barrier.The parking barrier system for frequently used entrances The Parking Barriers secure the entrance to underground garages, parking areas or factory entrances.
We offer an extensive range of Boom Barriers, Automatic Boom Barriers used for securing entry and exit points. These Boom Barriers are widely used in factories, office complexes, condominiums, toll tax plazas etc. Our sophisticated Auto Boom Barriers are available with an inbuilt anti crush safety device specially meant for suspending the motion of the barrier.

Boom Barrier which is a bar or pole that allow the boom to block vehicular access through a point. Usually the top of a bottom gate rises in a vertical arc to a nearest vertical position. These are used at crossings, parking, entrance, checkpoints and other restricted areas.

1.INTRODUCTION TO AUTOMATIC BOOM BARRIER: The Complete Boom Barriers drive system is installed on a metal base frame and can be easily detached by removing bolts. The Special lever system ensures that the boom is locked in both end positions.

•The simplest process in this barrier is radio remote transmitters. You can operate barrier from Vehicles. It is much secured.

•The Barrier should be mounted on a concrete foundation of plan area & The Distance should be maintained between the boom tips.

•Multifunctional control unit with shock resistant plug-in terminals is attached in each barrier system.

•We can also execute the complete project by providing the Security & Safety Solution for Automatic Boom Barriers etc...

Boom Barrier which is a bar or pole that allow the boom to block vehicular access through a point. Usually the top of a bottom gate rises in a vertical arc to a nearest vertical position. These are used at crossings, parking, entrance, checkpoints and other restricted areas.

                     A boom barrier, also known as a boom gate, it is a bar, or pole pivoted to allow the boom to block vehicular access through a controlled point. Automatic Boom Barrier series are ideal for smooth operations with intensive use. It’s reliable mechanism and compact control unit designs to meet wide range of industrial, commercial and residential application.

                   There are various technologies for an automatic boom barrier. One of them is electro-mechanical, which is widely used due to its reliability. The other technologies are often manufacturer specific. This electro-mechanical device comes with 24VDC drive unit which can run continuously without generating heat, so electro-mechanical boom barriers can be operated continuously and in an intensive duty cycle.

2.DESCRIPTION / SPECIFICATIONS OF AUTOMATIC BOOM BARRIER:

•Solution: Boom Barriers system for frequently used at entrances and very useful in traffic management, parking and security for securing the entry and exit points.

•Type: Automatic, Semi-Automatic and Manual.

•Length: Boom Barriers 3500 mm To 6000 mm 

•Telescopic Boom Close Size 3000 mm in Length & Open Length 6000 mm.

•Boom Can Be Adjustable At Any Length In Between 3.5 Meter To 6 Meter.

•Passage height: max. 2 m

•Nominal voltage: 230 V

•Double Spring Balance for Heavy Duty Use.

•Opening & Closing Time 6 Sec.

•Rest Post for Boom.

•Safety Sensor

•Push Button

•Flashing Light

•Range of temperature: -20°C up to +60°C 

•Power Supply: AC220V + 10% 50Hz

•Input Current: 1.8A

•Input power: 400W

•Revolution : 1400rpm

•Thermal protection : 120Oc

•Working temperature : -20oC ~ + 50oC

•Torque: 120N.m

•Weight: 70kg

•Opening time : <3.5sec <5.5sec

•Strength  arm length : 3-5m <5-6m

•Folding arm length : <4.5m <5m

•Fencing arm length : <4m <4.5m

•Output voltage for ext. Device : 12VDC, 24VAC

•Protection fuse : 5A

•Protection rate : IP44

•Output for blinker : AC220V

•Height of Boom from ground : 884 to 914 (Approx mm)

•Housing Dimensions (Approx mm) : 260 x 270 x 1007 to 450 x 295 x 1007

•Boom Dimension (mm) : 60 x 40 to 100 x 40

•Controller Protecting Rating : IP54

•Control Panel Power Supply (V): 230 A.C.50/60Hz

•Motor Power Supply (V) : 24 D.C

•Power (W) : 300

•Current Draw (A) : 1.5

•Duty Cycle : Intensive use

•Motor Capacity 240W

•Daily Cycle Suggested 1500 Nos

•Frequency : 60Hz

•Motor : Electro Mechanical

•Voltage : 220v

•Controller : Microprocessor Based

•Body : Weather Proof

•Other Accessories : Operating Switch & Boom Stand / Remote

•Interface : RS 485 / TCP/IP

•Boom Motion Control: By Balanced Spring System

•Optional :  Access Control System, RF Reader, RS 485 to RS 232 Convertor, Photo Cell

3.FEATURES OF AUTOMATIC BOOM BARRIER:

•High torque motor: Long lasting motor that generates up to 600Nm torque.

•Smooth operation: No bounce/jerk of boom at end positions.

•Better visibility: White aluminium boom bar with reflective strips and RAL 2005 powder coated housing.

•Several versions of automatic barrier are available such as hydraulic & electromechanical.

•Dual speed of the barrier ensures quick opening and closing of the barrier with soft landing.

•Highly durable

•High performance

•Cost-effective

•Seamless finish

•Oil immerged gear reducer   

•Self-locking in closed position

•Quiet and stable operation

•Powerful torsion spring

•Manual release handle in case of Power failure

•Wiring terminals for remote control button switch, alarm lamp, infrared photocell and loop detector

•Available to connecting with parking system and toll gate system.

•Auto-stop in the event of obstruction

•Open (Up) priority

•Plug type antenna is included on the control board

•Hopping code remote control with max

•Four buttons remote transmitter can separately control max. 4 barriers.

•Remote distance up to 30 meters.

•FCC approved for remote control.

•IP54 protection: Control unit is IP - protected making it dust and water resistant.

•Optical beam sensor: Safety device to detect presence of vehicles and reversal of boom movement

•Access control operation: Boom barrier operated through push button switch and can also be operated through access control system.

•Manual operation in case of power failure: Barrier can be raised or lowered by releasing the boom lock with key type mechanism.

•Durability

•Easy to install

•Sturdy design

•Optimum finish

4.APPLICATIONS OF AUTOMATIC BOOM BARRIER:

•Automatic Boom Barriers used for securing entry and exit points.

•Tolls Plaza’s

•Parking areas

•Industries

•Private & govt. Assets

•Residential areas

•Airports 

•Factories

•Office Complexes 

•Corporate Houses

•Note: 1) Any Civil, Carpentry Or Electrical Work Will Be in The Client Scope.

2) Scaffolding To Be Provided By The Client While Installation.

5.WHAT IS THE ROLE OF AUTOMATIC BOOM BARRIER:

5.1.What is Automatic Boom Barrier?  Boom Barrier which is a bar or pole that allow the boom to block vehicular access through a point. Usually the top of a bottom gate rises in a vertical arc to a nearest vertical position. These are used at crossings, parking, entrance, checkpoints and other restricted areas.

5.2.Description of Automatic Boom Barrier? The Description of Automatic Boom Barriers is given in three Ways. One is for Base and the other is for Pole / bar which is connected to Boom and the Last is the Pole at the Other Side. Coming to Base Boom it is in the Shape of Rectangle where it is fixed to ground by using Nuts & Bolts. The Inner section of Boom consists of Internal Mechanism where to operate the Barrier / Pole. It is also connected to Electricity for Automatic Purpose. The Outer Section is completely covered with ABS Plastic to Make the Boom to look Good.

                  Now Coming to Pole / Bar, this pole / bar need to be connected to Boom in a Horizontal way. So that by internal Mechanism in Boom it can move to Up & Down while the Vehicles are moving. The Bar is connected to boom at one side of boom with Nuts & Bolts in the direction of connected to internal mechanism. This Connection is also covered with Plastic Sheet. The Wire Connection will be given through two PVC Pipes to the Bar. So that it can Move automatically.

                    Let’s Move to the Last Pole which is installed on ground by digging the Ground on exactly other side of Boom. Because the Bar which is connected to boom gets rested on that pole. The Resting Pole must be in the Shape of Y. So that the Bar gets Rest in the Middle of Y. So that for Simple Things it does not gets moved to other Directions and does not get hurt to any persons.

5.3.Why We Use Automatic Boom Barrier? Places where there are possibilities of heavy traffic there you can use this product.  This fully automated product is one of the marvels from our stable which can automatically direct the incoming and outgoing vehicles. As this product is made from the top quality material so one can use it for a longer period of time and due to its water resistant quality is ideal for using in any weather condition. 

5.4.Where are they used? These Automatic Boom Barriers are used near Residential Areas, where as Apartments, Corporate Areas such as Factories, Offices etc. These Boom Barriers are used for Security Persons and does not allow moving the Other Persons to Restricted Areas. Only The Persons belongs to that area / Factory By showing their Identity they can enter in to the area by crossing this Boom Barrier.

                     This really helps to avoid unknown Persons to allow in to our area and helps to identify that how many people are in Particular area. This Increases the Security for Particular area.

5.5.How are they Fixed?     

•The installation ground shall be the reinforced concrete, and the thickness shall be more than 100mm.

•Please drill the installation holes for the expansion bolts M10 or pre launch the installation bolts M10, and leave enough length more than 30mm.

•Please pre-launch one 25mm PVC pipe underground, and let it protrude the ground more than 50mm.

•Let the power supply wires and the access control device cables through the PVC tube to the turnstile power supply terminal and access control device.

•Two PVC pipes will be required if the cables for the access control device is not the shielded wire.

•Arm Assembly :

•Insert the arm head into the slot of the moving disk, and let the fixing hole in the arm meet the fixing hole in the moving disk. Please find the mark in the arm and moving disk slot, and let them be the same one.

•Insert the peg into the fixing hole, and let it be in the right position.

•Fix the peg with the screw’s

•Wiring Connection

•Input Signal Requirements : 

•12V voltage signal, relay type.

•More than 100ms DC 12 V pulse signal, more than 10mA.

•Wire/Cable Connection :

•Connect the AC 220V power supply wire to the designated terminal.

•Connect the output signal cable of the access control device to the designated terminals, as the wiring diagram show.

•In the turnstile, there is one press button controller is connected. You can connect output cable of your own access control device to replace the press button controller, or connect them together.

•Function :

The left unlock signal is given to unlock the turnstile arm in the left direction. The LED indicator turns green to show the left direction free. Push the arm of turnstile to a definite degree, the arm moves to the next position. If no one pushes the arm of turnstile within the definite time, the turnstile will be locked automatically.

The right unlock signal is given to unlock the turnstile arm in the right direction. The LED indicator turns green to show the right direction free. Push the arm of turnstile to a definite degree, the arm moves to the next position. If no one pushes the arm of turnstile within the definite time, the turnstile will be locked automatically.

•Arm Drop Down

•When the power supply is failed, the turnstile arm will drop down automatically to free the passageway. When the power supply is on, press the arm and then put up the arm to the horizontal position, the turnstile arm will be locked again in the block status.

•Single Direction Setup

•If you want to let one direction be free, please adjust the related screw after you open the turnstile housing top cover and inside cover. Let the position arm be in the unlock position by hand, and let the adjust screw lock the position arm.

6.Life Span & Warranty of Automatic Boom Barrier:

•One Year Warranty against any Manufacturing Defect but not Usage Defect / Natural Calamity.

•Our Product can sustain up to 1 year without any Usage Defect.

7.CONCLUSION: These are the Complete Specifications, Features of Automatic Boom Barriers. This helps for Security Purpose in Corporate areas & Residential areas. Ynm automatic Boom Barriers  gives you Long life and they are Highly Durable in any Whether Conditions.


 
The parking barrier System Solution & Installation:

•    The Complete Boom Barriers drive system is installed on a metal base frame and can be easily detached by removing bolts. The Special lever system ensures that the boom is locked in both end positions.
•    The simplest process in this barrier is radio remote transmitters. You can operate barrier from Vehicles. It is much secured.
•    The Barrier should be mounted on a concrete foundation of plan area & The Distance should be maintained between the boom tips.
•    Multifunctional control unit with shock resistant plugin terminals is attached in each barrier system.
•    We can also execute the complete project by providing the Security & Safety Solution for Automatic Boom Barriers etc...

Installation Charges: Rs. 10,000 per Each Piece
Note: 1) Any Civil, Carpentry Or Electrical Work Will Be in The Client Scope.
2) Scaffolding To Be Provided By The Client While Installation.

Warranty & Services: One year from The Date of Installation against Any Manufacturing Defect Only

Automatic Boom Barrier along with Installation Service in Hyderabad
 

We regularly Supply the Boom Barrier in Hyderabad, Mumbai, Delhi, Bangalore,Chennai, Ahmedabad, Kolkata, Surat, Pune, Jaipur, Lucknow, Kanpur, Nagpur, Agra, Visakhapatnam, Indore, Thane, Bhopal, Pimpri-Chinchwad, Patna, Vadodara, Ghaziabad, Ludhiana, Coimbatore, Madurai, Nashik, Faridabad, Meerut, Rajkot, Kalyan-Dombivali, Vasai-Virar, Varanasi, Srinagar, Aurangabad, Dhanbad, Amritsar, Navi Mumbai.

 
Parking Barriers Suppliers in Hyderabad

 
Boom Barrier for Toll Plaza in Hyderabad
 
Automatic Boom Barriers Manufacturer in India

Manufacturer, Wholesaler, Supplier and Service Provider of Automatic Boom Barriers,  Toll Gate Boom Barrier installation Service in Hyderabad, Parking Electro Mechanical Barrier Suppliers in Hyderabad,Toll Gate Barrier,  Parking Auto Boom Toll Barrier,Automatic Industrial Vehicle Barrier, Automatic Barrier, Barrier Gates and Boom Barrier.

Brand :
YNM ROAD SAFETY
Solution :
Automatic Boom Barrier
Product Code :
YNM-BoomBarriers
GO TO TOP