YNM-RubberRumbleStrips
  • Rubber Rumble Strips Manufacturers in India
Rubber Rumble Strips Manufacturers in India
Specification and Solution
Solution :
 

 We are Leading Manufacturers and Suppliers of Rubber Rumble Strips in from Hyderabad to all over India, The Rubber Rumble Strips are place in the middle of roads to improve traffic safety. It prevents drivers from crossing road centre line without noticing it. We are specialized in manufacturing of Rubber Rumble Strips, which are made from Recycled Rubber. These Rubber Rumble Strips are highly resistant to various impacts and harsh weather conditions. Rumble strips, also known as sleeper lines, alert strips, audible lines, sleepy bumps, wake up calls, growlers, drift lines, and drunk bumps. 

 

1.INTRODUCTION TO RUBBER RUMBLE STRIPS: A rumble strip is applied along the direction of travel following an edge line or centre line, to alert drivers when they drift from their lane. Rumble strips may also be installed in a series across the direction of travel, to warn drivers of a stop or slow down ahead, or of an approaching danger spot. In favourable circumstances, rumble strips are effective (and cost-effective) at reducing accidents due to inattention. The effectiveness of shoulder rumble strips is largely dependent on a wide and stable road shoulder for a recovery, but there are several other less obvious factors to consider during design.Rumble strips are divided into transverse rumble strips, shoulder rumble strips, and centre line rumble strips, depending on how they are used. Transverse rumble strips are placed in the travel lanes where most if not all vehicles will cross them. They are used to alert the driver of an upcoming intersection, toll booth or similar hazard. They may cross the entire road from shoulder to shoulder, or they may only be in the wheel paths.Shoulder and centre line rumble strips are used to reduce lane departure crashes. Centre line rumble strips are used on undivided highways to reduce cross-over incidents and resultant head-on collisions. Shoulder rumble strips are used primarily to reduce run-off-road collisions. They alert distracted or drowsy drivers that they are leaving the roadway or crossing the centre line of the road. In this application, they are narrower and outside of the wheel paths. Rumble strips are grooves or rows of indents in the pavement designed to alert inattentive drivers through noise and vibration and reduce the number of accidents. These rubber rumble strips have multiple applications, and can be used on roadways to separate lanes, and reduce traffic speeds. Distances can be varied between the strips to obtain the required effect. Other applications include mounting on walls for protective strips and can also be used for spill bonding. 

2.DESCRIPTION / SPECIFICATIONS OF RUBBER RUMBLE STRIPS: 

1.Material: Recycled Rubber 

2.Length: 500 mm 

3.Width: 125 mm

4.Height: 25 mm. 

5.Weight of Rubber Rumble Strips : 3.2 Kgs.  

6. 1 Meter = 2 Pieces - One Black & One Yellow.   

7.   4 Screwing Points on One Piece, total 8 Screwing Points in One Meter.

8.  Made in India. 

3.FEATURES OF RUBBER RUMBLER STRIPS: 

•Durable and versatile low profile recycled rubber  

•Used as a speed moderator or lane divider on roadways.  

•Can be used as a wall mounted bump protector.  

•Can be installed with appropriate masonry fixings or glued using a suitable adhesive 

•Black & Yellow color combination for greater visibility.    

•Rubber as a base material helps it in making better grip on the road.   

•Moisture & temperature resistant.   

•Instant installation with the application of epoxy and bolts.   

•Modular design provides easy installation.   

•No need to paint again & again due to pre-color, hence painting cost is NIL.   

•Reflectors & Glass Elements provides better night vision.  

•Provides much better comfort for passengers in the vehicles.   The design on the speed Humps makes easy drainage of rain water.    

•Any length of speed humps is possible as the design/sections are modular.   

•Encourages Safer Driving Speeds   

•Highly Flexible Rubber Construction   

•Suitable For Heavy Traffic  

•Skid Resistant Surface.   

4.APPLICATIONS OF RUBBER RUMBLER STRIPS:

•Highways.  

•Apartments  

•School Zone.  

•Toll Plaza  

•Entry Point of Bridges  

•Narrow Roads   

•Hospitals  

•Residential areas  

•Bus Stations 

•Railway stations  

5.HOW RUBBER RUMBLE STRIPS WORKS: 

5.1.What is a Rubber Rumble Strips? The Rumble Strips are place in the middle of roads to improve traffic safety. It prevents drivers from crossing road centre line without noticing it.  

5.2.Description of Rubber Rumble Strip?

There are Two Pieces in 1 Meter of Rumble Strips. One is in Yellow Colour & the other is in Black Colour. There are 4 Screwing Points on one Piece of Speed Breaker to Install the Rumble Strips on Roads. On one Meter of Rumble Strips we can find 8 Screwing Points for Installation. There are zigzag lines on Speed Breaker which helps to drain out the water on Roads when rain falls and does not face the colour in any weather conditions.Rubber Rumble Strips it is very compact and has high resistance capacity to withstand severe impacts. The pre-coloured UV stabilized material (Black & Yellow) provides it permanent colour. We hold expertise in offering our valuable clients a wide range of Rumble Strips. Precisely made from Recycled rubber sourced from reliable vendors in compliance with the set industry standards, these Rumble Strips are extensively demanded in the global market.

5.3.Why we use Rubber Rumble Strips on Roads?
The Rumble Strips are place in the middle of roads to improve traffic safety. It prevents drivers from crossing road centre line without noticing it. These Strips are suitable to be fixed in a series on the road for controlling the speed of vehicle. Offered Rumble Strips are accurately designed at our sound production unit by making use of premium grade materials in accordance with the industry pre-set guidelines and norms. A team of our quality analysts carefully test these Rubber Rumble Strip on durability and sturdiness parameters.This Rumble Strips conforms to government standards and industry regulations. National Highways Authority of India is responsible for highways.

5.4Where are they used on Roads?

Rumble Strips are installed at where there is a consistent record of accidents are happened to the speed of vehicles. These are installed at Toll Plazas, entry point of bridges and narrow roads to control the vehicle speed.These are also placed at urban areas for minor roads like school zones, hospitals, residential areas, bus Stations and railway stations. So that children’s and Senior citizens are easily crossed the road.  The Rumble Strips not recommended for high speed roads and highways outside of urban areas.The vehicles drivers should be warned of the presence of speed breakers are installed on the road by posting a suitable sign boards. And Rumble Strips are mostly used in yellow and block colour combination with reflectors.

  5.5.How to Install Rubber Rumble Strips on the Roads? 

•Before installing your Rumble Strips, make sure that the road surface that you will be fitting them onto is clean, dry, and undamaged. 

•If any damage to the surface should be repaired before the Rumble Strips are installed to provide a reasonably flat and consistent surface. 

•To Position Rumble Strips in desired location. Mark where to fix bolt holes sit. Remove speed bump. 

•Drill each marking through pavement to create space for steel spikes.  

•Mix enough epoxy for one installation. Fill the holes to 2” from top with adhesive.    

•Apply adhesive to bottom of Rumble Strips & Set in correct place & Install washers with hammer.  

6.Life Span & Warranty of Rubber Rumble Strips:

•Our Product can sustain Up to 1 Year if there is no Usage Defects. 

•One Year Warranty against any Manufacturing Defect but not Usage Defect / Natural Calamity. 

7.CONCLUSION:These are the Complete Specifications & Uses of of Rubber Rumble Strips these are very helpful in Highways, Parking areas, in construction sites etc., to control the accidents. This is why it is called as a world’s product. 

 

Rubber Rumble Strips Manufacturer in India

We are Leading Manufacturers and Suppliers of Rubber Rumble Strips in from Hyderabad to all over India, The Rubber Rumble Strips are place in the middle of roads to improve traffic safety. It prevents drivers from crossing road centre line without noticing it. We are specialized in manufacturing of Rubber Rumble Strips, which are made from Recycled Rubber. These Rubber Rumble Strips are highly resistant to various impacts and harsh weather conditions. Rumble strips, also known as sleeper lines, alert strips, audible lines, sleepy bumps, wake up calls, growlers, drift lines, and drunk bumps. 

 

1.INTRODUCTION TO RUBBER RUMBLE STRIPS: 

 

A rumble strip is applied along the direction of travel following an edge line or centre line, to alert drivers when they drift from their lane. Rumble strips may also be installed in a series across the direction of travel, to warn drivers of a stop or slow down ahead, or of an approaching danger spot. In favourable circumstances, rumble strips are effective (and cost-effective) at reducing accidents due to inattention. The effectiveness of shoulder rumble strips is largely dependent on a wide and stable road shoulder for a recovery, but there are several other less obvious factors to consider during design.Rumble strips are divided into transverse rumble strips, shoulder rumble strips, and centre line rumble strips, depending on how they are used. 

 

Transverse rumble strips are placed in the travel lanes where most if not all vehicles will cross them. They are used to alert the driver of an upcoming intersection, toll booth or similar hazard. They may cross the entire road from shoulder to shoulder, or they may only be in the wheel paths.Shoulder and centre line rumble strips are used to reduce lane departure crashes. Centre line rumble strips are used on undivided highways to reduce cross-over incidents and resultant head-on collisions. Shoulder rumble strips are used primarily to reduce run-off-road collisions. They alert distracted or drowsy drivers that they are leaving the roadway or crossing the centre line of the road. In this application, they are narrower and outside of the wheel paths. Rumble strips are grooves or rows of indents in the pavement designed to alert inattentive drivers through noise and vibration and reduce the number of accidents. These rubber rumble strips have multiple applications, and can be used on roadways to separate lanes, and reduce traffic speeds. Distances can be varied between the strips to obtain the required effect. Other applications include mounting on walls for protective strips and can also be used for spill bonding.  

 

2.DESCRIPTION / SPECIFICATIONS OF RUBBER RUMBLE STRIPS: 

 

1.Material: Recycled Rubber 

2.Length: 500 mm  

3.Width: 125 mm

4.Height: 25 mm. 

5.Weight of Rubber Rumble Strips : 3.2 Kgs.  

6. 1 Meter = 2 Pieces - One Black & One Yellow.      

7.   4 Screwing Points on One Piece, total 8 Screwing Points in One Meter.

8.  Made in India. 

3.FEATURES OF RUBBER RUMBLER STRIPS: 

•Durable and versatile low profile recycled rubber  

•Used as a speed moderator or lane divider on roadways.  

•Can be used as a wall mounted bump protector.  

•Can be installed with appropriate masonry fixings or glued using a suitable adhesive 

•Black & Yellow color combination for greater visibility.    

•Rubber as a base material helps it in making better grip on the road.   

•Moisture & temperature resistant.    

•Instant installation with the application of epoxy and bolts.    

•Modular design provides easy installation.   

•No need to paint again & again due to pre-color, hence painting cost is NIL.   

•Reflectors & Glass Elements provides better night vision.  

•Provides much better comfort for passengers in the vehicles.   

The design on the speed Humps makes easy drainage of rain water.    

•Any length of speed humps is possible as the design/sections are modular.   

•Encourages Safer Driving Speeds   

•Highly Flexible Rubber Construction   

•Suitable For Heavy Traffic  

 

 

•Skid Resistant Surface.   

4.APPLICATIONS OF RUBBER RUMBLER STRIPS:

 

•Highways.  

•Apartments  

 

•School Zone.  

 

•Toll Plaza  

•Entry Point of Bridges  

•Narrow Roads   

 

•Hospitals  

 

•Residential areas  

•Bus Stations 

 

•Railway stations  

5.HOW RUBBER RUMBLE STRIPS WORKS:

 

5.1.What is a Rubber Rumble Strips? 

The Rumble Strips are place in the middle of roads to improve traffic safety. It prevents drivers from crossing road centre line without noticing it.  

 

5.2.Description of Rubber Rumble Strip?

There are Two Pieces in 1 Meter of Rumble Strips. One is in Yellow Colour & the other is in Black Colour. There are 4 Screwing Points on one Piece of Speed Breaker to Install the Rumble Strips on Roads. On one Meter of Rumble Strips we can find 8 Screwing Points for Installation. There are zigzag lines on Speed Breaker which helps to drain out the water on Roads when rain falls and does not face the colour in any weather conditions.Rubber Rumble Strips it is very compact and has high resistance capacity to withstand severe impacts. The pre-coloured UV stabilized material (Black & Yellow) provides it permanent colour. We hold expertise in offering our valuable clients a wide range of Rumble Strips. Precisely made from Recycled rubber sourced from reliable vendors in compliance with the set industry standards, these Rumble Strips are extensively demanded in the global market.

 

5.3.Why we use Rubber Rumble Strips on Roads?

 

The Rumble Strips are place in the middle of roads to improve traffic safety. It prevents drivers from crossing road centre line without noticing it. These Strips are suitable to be fixed in a series on the road for controlling the speed of vehicle. Offered Rumble Strips are accurately designed at our sound production unit by making use of premium grade materials in accordance with the industry pre-set guidelines and norms. A team of our quality analysts carefully test these Rubber Rumble Strip on durability and sturdiness parameters.This Rumble Strips conforms to government standards and industry regulations. National Highways Authority of India is responsible for highways.

 

5.4Where are they used on Roads?

Rumble Strips are installed at where there is a consistent record of accidents are happened to the speed of vehicles. These are installed at Toll Plazas, entry point of bridges and narrow roads to control the vehicle speed.These are also placed at urban areas for minor roads like school zones, hospitals, residential areas, bus Stations and railway stations. So that children’s and Senior citizens are easily crossed the road.  The Rumble Strips not recommended for high speed roads and highways outside of urban areas.The vehicles drivers should be warned of the presence of speed breakers are installed on the road by posting a suitable sign boards. And Rumble Strips are mostly used in yellow and block colour combination with reflectors.  

 

5.5.How to Install Rubber Rumble Strips on the Roads? 

 

•Before installing your Rumble Strips, make sure that the road surface that you will be fitting them onto is clean, dry, and undamaged. 

 

•If any damage to the surface should be repaired before the Rumble Strips are installed to provide a reasonably flat and consistent surface. 

•To Position Rumble Strips in desired location. Mark where to fix bolt holes sit. Remove speed bump. 

•Drill each marking through pavement to create space for steel spikes.  

•Mix enough epoxy for one installation. Fill the holes to 2” from top with adhesive.    

 

 

•Apply adhesive to bottom of Rumble Strips & Set in correct place & Install washers with hammer.  

6.Life Span & Warranty of Rubber Rumble Strips:  

 

•Our Product can sustain Up to 1 Year if there is no Usage Defects. 

 

•One Year Warranty against any Manufacturing Defect but not Usage Defect / Natural Calamity. 

7.CONCLUSION:These are the Complete Specifications & Uses of of Rubber Rumble Strips these are very helpful in Highways, Parking areas, in construction sites etc., to control the accidents. This is why it is called as a world’s product. 

 

Rubber Rumble Strips Suppliers in Hyderabad

Rubber Rumble Strips Suppliers in India

Rubber Rumble Strips Exporters from India

 

Product Code :
YNM-RubberRumbleStrips
Brand :
YNM ELECTRICAL SAFETY

 

Easy Return, Replacement and Refund Policy

As ChesaDental values our customers experience when shopping with us, we offer easy exchanges and refunds/returns. We understand that if the order did not meet your expectations, you are entitled to a refund/replacement as long as your reasoning meets ChesaDental’s return policy conditions.

Any inquiries with regards to this policy can be addressed to our Customer Support. Do make sure that all return policy conditions are met and you have all the necessary information at hand prior to contacting us to make it easier for us to assist with your return/refund.

 

14 Days Easy Return

ChesaDental offers easy exchanges and refunds/returns for the benefit of our customers. Items sold and shipped by ChesaDental can be returned, exchanged or replaced (if the item is available) within 14 days after the date of delivery. We have a convenient returns procedure, as long as the product purchased is not in the non-exchangeable and non-refundable brands & items listed below. However, you will have to ensure that you submit a report for returns at ChesaDental website within 48hours upon receiving the products. Any delay to this timeframe will invalidate the 14 days Easy Return policy and regretfully, your request for return will not be entertained.

The free replacement order will be shipped through standard shipping once the original order is returned. A return and replacement can only be requested if the following conditions apply:

1.   Damages/Defective Products *

Defective item and/or does not work properly per description in product sales page.

Product is damaged upon delivery due to insufficient packaging by seller or courier mishandles the product.

* Applies to all products except for branded electronic products and mobile phones. For branded electronics & mobile phone products, kindly refer to product warranty card terms and conditions.

2. Product does not match or incomplete

Product received is missing parts or accessories which were supposed to be included as advertised.

Wrong product is delivered to Buyer by Seller

3. Product different from description

The appearance or description of product received by buyer is different from product sales page. Discrepancies in size, colour etc unless stated by the supplier during purchase.

4. Genuine Product concerns

Items received are counterfeit products that carry specific brand names and are confirmed to be fake or a copy of original items.

5. Expired products

A product received is past expiration date at the time of delivery. Products such as cosmetics, packaged foods and other type of perishables included.

 

Requirements for a valid return:

1. Original Packing

All items must be in actual packaging as received during delivery.

2. Tags & Labels Attach

All returned items must have all tags and labels attached in the original condition.

3. In New & Unused Condition

Items are expected to be in their original and unused state.

4. Full Accessories

All accessories received with the item have to be included during return, including all free gifts that were sent.

5. Proof of Purchase (order number, tax invoice, etc.)

The purchase receipt or other necessary documents is required to serve as confirmation that item has been fully paid for and purchased from a particular seller. Include Printed Shipping Label and ChesaDental Tax Invoice in each return package box

 

The Process for 14 days Easy Return (How To)

 
Buyer must request for return product within 48 hours upon receiving goods and it is compulsory for buyer to fill up the online returns form. 

Buyer to pack and seal the goods properly and securely. Goods must be in new and unused condition with full accessories including free gifts if any. 

Buyer to print out consignment note and drop off the product to our nearest courier service office within 14 days after the date of delivery of goods/products.

Upon receiving the products,  will check and verify the products within 48 hours. If all the requirements are complied with, ChesaDental will proceed to refund or process a replacement product.

For replacement product, the seller will ship it out on the next working day after receiving the returned product. 

For the refund process, the amount will be transferred to store credit which will take 24 hours. If a request for money back transfer has been made, it will take approximately 3-5 days for the amount to be transferred back into the given bank account.

Do note that all the process time in days are based on working days

 

Non-Returnable Goods

 
Please note that due to concerns related to hygiene and packaging, certain items/products are classified as non-exchangeable, non-returnable and non-refundable. This is directive from seller. 

If you have a non-returnable item that arrived damaged or defective you can contact our ChesaDental Customer Support.

 

Category

Items That are Non-returnable

Mobile phones

All open and registered mobile phones and mobile accessories unless damaged.

Consumer electronic

All electronics category products unless damaged

Gift card

ChesaDental Gift card are not returnable

Groceries 

All Grocery category items are non-returnable with exception for expired items only

Pet Supplies

Pet supplies food, harnesses, aquarium supplies, pet shampoos/ conditioners

Fashion 

Lingerie, innerwear, undergarments, worn or soiled clothing’s

Beauty (head, face, body, hands, feet)

Hairspray, hair tonic, shampoos, hair conditioners, styling gels, hair colours, facial cleansers, face moisturizer, face cream, make up set, lipstick, lip balm or gloss, eye care products, deodorants, shower gel, bar soap, body shower, body lotion, fragrances, hand wash, feet wash and etc.

Garden 

Seeds

Musical instrument

Wind instruments, Harmonica, mouth organ

Hazardous material

Flammable liquids or gases

Personal care

Personal hygiene cleanser, oral care, personal grooming products like shavers, hair remover and epilator, panty liner, sanitary pads..etc

Baby products

Breast pads and shields, breast milk containers, nursing covers, baby grooming products, baby wash, shampoos, skin care, wet wipes, diapers and nappies, soothers and teethers, feeding related products like bottles, bottle sets and feeding teat.

   

Change of Mind Policy

At ChesaDental, we do not accept change of mind return request once the products have been shipped out.

However, cancellation may still be entertained if the products have yet to be shipped out. This varies from product to product depending on seller and type of product.

You may click the button of cancellation through your ChesaDental account and the cancellation will take effect immediately. 

Once cancellation is approved, a refund will be processed through either transfer to store credit or bank account (optional).

For the refund process, the amount will be transferred to store credit which will take 24 hours. If a request for money back transfer has been made, it will take approximately 3-5 days for the amount to be transferred back into the given bank account

 Do note that all the process time in days are based on working days.

 

 

More Products From YNM
GO TO TOP